Visual Driving Car Blind Spot Monitoring System help for changing lane

When driving on the road, changing lanes is a common operation, but if not correctly change lane is one of the reasons that cause traffic accidents. In fact, changing lanes is a seemingly simple but not simple operation. So, how to change lanes correctly on the road?

1.Turn on the turn signal before changing lanes

The first step before changing lanes is to turn on the turn signal, it's very important. Turn on the turn signal for at least 3 seconds before changing lanes. If you don't turn on the turn signal in advance, it can easily cause a traffic accident. Among accidents caused by lane changes, the main cause is: the car changing lanes suddenly changed lanes without turning on the turn signal.

Remember that whenever the car's driving trajectory changes, turn on the turn signal.

2. Observe the rear view mirror to ensure a safe distance between vehicles.

While turning on the turn signal, also observe the rear view mirror or Visual driving streaming media rearview mirror to determine whether the surrounding road conditions are suitable for changing lanes. If you have visual driving Car Blind Spot Monitoring System, with Lane Changing Assistant function, when you turn on the turn signal and plan to change lane, if the blind spot detection system detects vehicle behind, it will flash light and make didi sound to remind you.

3. Slowly turn the direction and change lanes quickly.

Remember not to slow down, turn the steering wheel slightly, and then cut into the adjacent lane at a small angle. Be careful not to make the cutting angle too large, otherwise it may easily cause the vehicle to lose control. Do not cross multiple lanes when changing lanes, be careful to only change one lane at a time. As the saying goes, "Haste makes waste", lane changing behavior that spans two or three lanes at a time is the most dangerous.

Shenzhen Zhitong Yingchuang Electronic Technology Co., Ltd

ADD: Jinke Dacheng Industrial Park, Xinhe Road, Longgang District, Shenzhen City, Guangdong Province, China

Post code:518114

Tell: 0086-13538239997

Email:bob@visualdriving.com